In-line filters can have a single or duplex arrangement. A single in-line filter is used in applications where the flow can be interrupted, or the filter can be bypassed when the filter element is serviced. Duo filters are used when continuous filtration is required.
Learn MoreThe M-clean cleaning system is a modular cleaning system that uses high-pressure water in combination with an effective evacuation and air knife system to remove contaminants.
Learn MoreAmong other applications, the press section felt cleaning assembly, also known as UHLE pipe, is designed to enhance uniform CD dewatering and cleaning, and minimize energy consumption on the press section of a paper machine.
Learn MoreDoctor blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreDoctor blade holders position the doctor blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaning blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreKadant desuperheaters are designed to reduce the temperature of superheated steam for optimal heat transfer and efficiency.
Learn MoreA direct steam injection heater provides a cost-effective method to heat water and other fluids by injecting steam directly into the fluid. The direct injection heater is designed to handle a wide range of flow rates and deliver hot fluids at precise temperatures.
Learn MoreKadant Johnson flexible hose has been engineered especially for use as inlet and outlet connections to Kadant Johnson rotary joints. It prevents pipe strains from creating tension or stress on the rotary joint, and does not restrict the joint's built-in flexibility.
Learn MoreTo improve the operating efficiency of pneumatic equipment, Kadant Johnson air separators eliminate 99% of entrained contaminants including moisture, pipe scale, dirt and oil.
Learn MoreKadant sight flow indicators are engineered to provide visual observation of liquid and gas flows. These pipeline indicators are available with ductile iron or bronze bodies. All glass windows are made of Pyrex® or equal.
Learn MoreKadant Johnson steam jet thermocompressors are designed to boost low pressure steam by accurately mixing the low pressure steam with high pressure steam.
Learn MoreComplete systems for all pulping and detrashing applications based on your requirements for quality, energy efficiency, and maximum fiber recovery.
Learn MoreComprehensive cleaning solutions for high efficiency removal of all types of contaminants from pulp slurries.
Learn MoreA full range of innovative options for screening stock pulp. Cost-effective solutions for a variety of applications including wastepaper recycling, deinking, virgin fiber and approach flow processing.
Learn MoreRecovery systems for white water, heat, chemicals, and fiber for a variety of paper and pulp mill applications.
Learn MoreBased on our advanced flotation technology, the MAK-C Deinking Cell offers maximum yield and efficiency.
Learn MoreTop-performing refiners and dispersers built tough and used across the globe.
Learn MoreKadant PAAL’s Konti automatic channel baler delivers high throughput and bale weights with low energy consumption.
Learn MoreKadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials.
Learn MoreKadant PAAL’s S1W fully automatic baler is is designed to press tin and aluminum cans into highly compressed packages.
Learn MoreKadant PAAL’s PAC baler is a semi-automatic, closed end baler with manual horizontal tying, incorporating full bale ejection.
Learn MoreKadant PAAL’s DOKON is the only high performance, fully automatic channel baler in the market to offer consistent and reliable operation with a horizontal twine tying system.
Learn MoreKadant PAAL’s HTR baler is a fully automatic, high-compression two-ram baler offered with a plastic strap tying system.
Learn MoreThe Fuji King Rotary Debarker is an innovative development in debarking technology employing a combination of mechanical abrasion and log-to-log contact.
Learn MoreThe Kadant Carmanah 37/118 SmartDISC Strander cuts tree length or batch fed logs into strands for OSB production.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreThe SKD (Straight Knife Drum) Chipper uses straight-edged knives mounted across the face of a cylindrical drum, fed from an inclined chute, to produce quality chips.
Learn MoreThe Kadant Veneer Chipper process veneer waste at high production rates.
Learn MoreKadant GranTek Inc. transforms papermaking waste products into several viable cellulose granular products used as carriers for pest control in crop protection, green space maintenance, as an all purpose industrial absorbent and as premium cat box fillers.
Learn MoreDoctor blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreDoctor blade holders position the doctor blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaning blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreRoll cleaning blade holders position the roll cleaning blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaner assemblies are comprised of a roll cleaning blade, blade holder, structural beam, brackets and bearings along with an option to oscillate.
Learn MoreA double doctor system provides the extra performance of two independently adjustable doctor blades within one unit.
Learn MoreThe M-clean cleaning system is a modular cleaning system that uses high-pressure water in combination with an effective evacuation and air knife system to remove contaminants.
Learn MoreAmong other applications, the press section felt cleaning assembly, also known as UHLE pipe, is designed to enhance uniform CD dewatering and cleaning, and minimize energy consumption on the press section of a paper machine.
Learn MoreSpray nozzles are used to remove contaminants and are essential in the cleaning process of many manufacturing processes.
Learn MoreShower systems are used to clean contaminates off machine fabric. Stationary and oscillating shower systems are available for a variety of applications.
Learn MoreThe Mist Eliminator incorporates standard paper machine components to thoroughly clean forming fabrics and eliminate mist that is often associated with high-pressure showering.
Learn MoreElectro-mechanical shower oscillators are precisely synchronized with the machine speed and fabric loop to ensure that 100% of the fabric is cleaned.
Learn MoreIn-line filters can have a single or duplex arrangement. A single in-line filter is used in applications where the flow can be interrupted, or the filter can be bypassed when the filter element is serviced. Duo filters are used when continuous filtration is required.
Learn MoreA proper water resource recovery system is used to effectively and efficiently reclaim white water, heat, chemicals, and fiber from a variety of paper and pulp mill applications, including DAF filtrate, save-all water, and seal pit water.
Learn MoreAn Octopus stock approach system with consistency profiling ability allows the control of CD basis weight profile while paper machines are operating.
Learn MoreKadant provides papermaking tools including forming boards, gravity foils, VID™ Forming Technology, and high vacuum dewatering boxes.
Learn MoreAs demand increases for efficient use of energy and precision in papermaking, the need for reliable and accurate vacuum control on the wet end of the paper machine has never been greater. Kadant provides all the tools necessary for today’s papermaker to optimize their vacuum control system.
Learn MoreA rotary joint, also referred to as a rotary union or rotating union, permits the flow of various media from a stationary supply pipe and into and/or out of rotating equipment. Heat transfer and hydraulic media typically used with rotary joints and rotating unions include steam, water, thermal oil, hydraulic oil, air, and coolant.
Learn MoreKadant Johnson’s product innovation team focuses on making the best solution in the shortest time possible. We provide rapid design and manufacturing services to ensure our new project solutions process for custom rotary unions and swivel joints put our customers at the center of our schedule.
Learn MoreMulti-passage (MP) rotary unions are used when more than one media are used simultaneously. An MP rotary union provides multiple seals between stationary connections and rotating equipment, such as a drum, index table, clutch, or spindle.
Learn MoreHand-crafted rubber expansion joints available in single- and multiple-arch designs are custom-built to fit your application requirements. Options include PTFE-lined, concentric reducing, eccentric reducing, filled arch, lightweight, and off-set configurations.
Learn MoreCustom-engineered single- and dual-bellows designs made from 18-8 stainless steel alloy 321 with high intergranular corrosion resistance. Options include PTFE-lined, universally-tied, pressure-balanced, Gimbal, and hinged, among other configurations.
Learn MoreSolid-molded PTFE expansion joints are corrosion-resistant and made to withstand the high pressure and temperature in a compact, space-saving design. Available in standard sizes 1” to 12” with two, three, or five convolutions.
Learn MoreNon-metallic, flue-duct expansion joints available in eight standard profiles to fit your application requirements up to 2,000 F. Custom-designed with single-layer and composite belts and elastomers with excellent abrasion resistance.
Learn MoreCorrugated metal hose with and without external braiding and metal pump connectors to absorb vibration, misalignment, and piping thermal expansion or contraction. Options include rubber covering, unique alloys, and sizes from 0.25” to 12”.
Learn MoreCustom-engineered and hand-built flexible hose for a variety of industrial applications including high-pressure FDA compliant sanitary hose, chemical hose, air hose, petroleum hose, and material handling hose. Lengths available up to 500 feet and diameters up to 28”.
Learn MoreKadant desuperheaters are designed to reduce the temperature of superheated steam for optimal heat transfer and efficiency.
Learn MoreA direct steam injection heater provides a cost-effective method to heat water and other fluids by injecting steam directly into the fluid. The direct injection heater is designed to handle a wide range of flow rates and deliver hot fluids at precise temperatures.
Learn MoreKadant Johnson steam jet thermocompressors are designed to boost low pressure steam by accurately mixing the low pressure steam with high pressure steam.
Learn MoreWith no maintenance-intensive components to leak, wear, or fail, the Liqui-Mover condensate pump is a naturally more reliable than conventional pumps. As a result, the Liqui-Mover condensate pump will work longer, with less maintenance and far less downtime than conventional pumps.
Learn MoreReplacement level controls are available in both float and float free™ designs. The replacement assemblies are a reliable and cost effective solution for high maintenance pressure-powered pumps.
Learn MoreThe first priority of a corrugator steam system is to provide maximum temperature at the liner and medium interface for glue bonding. The ThermoMax system provides maximum steam pressure to the corrugator rolls and two preheater rolls that immediately precede them.
Learn MoreFor more than 80 years, Kadant Johnson has applied a systematic, application-specific approach to solving steam and fluid handling challenges.
Learn MoreKadant Johnson flexible hose has been engineered especially for use as inlet and outlet connections to Kadant Johnson rotary joints. It prevents pipe strains from creating tension or stress on the rotary joint, and does not restrict the joint's built-in flexibility.
Learn MoreTo improve the operating efficiency of pneumatic equipment, Kadant Johnson air separators eliminate 99% of entrained contaminants including moisture, pipe scale, dirt and oil.
Learn MoreKadant sight flow indicators are engineered to provide visual observation of liquid and gas flows. These pipeline indicators are available with ductile iron or bronze bodies. All glass windows are made of Pyrex® or equal.
Learn MoreKadant Johnson vacuum breakers provide a simple, dependable way to relieve unwanted vacuum which may develop in a closed vessel or pipeline. They can be used to prevent contamination from back siphonage in fluid handling systems, and to protect equipment against collapse or implosion.
Learn MoreComplete systems for all pulping and detrashing applications based on your requirements for quality, energy efficiency, and maximum fiber recovery.
Learn MoreComprehensive cleaning solutions for high efficiency removal of all types of contaminants from pulp slurries.
Learn MoreA full range of innovative options for screening stock pulp. Cost-effective solutions for a variety of applications including wastepaper recycling, deinking, virgin fiber and approach flow processing.
Learn MoreRecovery systems for white water, heat, chemicals, and fiber for a variety of paper and pulp mill applications.
Learn MoreBased on our advanced flotation technology, the MAK-C Deinking Cell offers maximum yield and efficiency.
Learn MoreTop-performing refiners and dispersers built tough and used across the globe.
Learn MoreA complete line of energy-efficient heat transfer products for the chemical pulp mill including blow-heat systems, multiple-effect evaporator & concentrator trains, indirect liquor heaters, condensate segregation, stripping, and methanol recovery.
Learn MoreEconomic recausticizing solutions for the kraft and soda processes, including innovative upgrades to clarification, filtration, and grit management solutions - all designed to maximize efficiency, reduce energy consumption and meet environmental regulations.
Learn MoreThe world’s only all-in-one, multi-stage displacement pulp washer, The Kadant Chemi-Washer® is a proven performer for brown stock and bleach plant applications the world over.
Learn MoreKadant PAAL’s Konti automatic channel baler delivers high throughput and bale weights with low energy consumption.
Learn MoreKadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials.
Learn MoreKadant PAAL’s S1W fully automatic baler is is designed to press tin and aluminum cans into highly compressed packages.
Learn MoreKadant PAAL’s PAC baler is a semi-automatic, closed end baler with manual horizontal tying, incorporating full bale ejection.
Learn MoreKadant PAAL’s DOKON is the only high performance, fully automatic channel baler in the market to offer consistent and reliable operation with a horizontal twine tying system.
Learn MoreKadant PAAL’s HTR baler is a fully automatic, high-compression two-ram baler offered with a plastic strap tying system.
Learn MoreThe Kadant PAAL chain conveyor is characterized by its robust and stable construction.
Learn MoreThe Kadant Carmanah 37/118 SmartDISC Strander cuts tree length or batch fed logs into strands for OSB production.
Learn MoreThe SmartRING Strander cuts tree length or batch fed logs into strands for OSB production. An innovative clamping system secures the logs in place while the carriage mounted Strander extends into the cutting chamber.
Learn MoreThe alignment conveyor improves log feed to Kadant’s stranders used in the production of OSB. The product provides operators with improved wood yield, strand quality and higher production throughput.
Learn MoreIn the manufacturing of OSB and other similar engineered wood products, knives are employed to process logs and produce raw materials (strands) in dimensions that are required by the process.
Learn MoreThe LPPL system allows Oriented Strand Board (OSB) manufacturers to measure and optimize the loading efficiency of their log stranders.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreThe SKD (Straight Knife Drum) Chipper uses straight-edged knives mounted across the face of a cylindrical drum, fed from an inclined chute, to produce quality chips.
Learn MoreThe Kadant Veneer Chipper process veneer waste at high production rates.
Learn MoreKadant Carmanah has more than 80 years of chip screen application and manufacturing experience. The company’s suspended chip screen design is a result of that experience.
Learn MoreThe Fuji King Rotary Debarker is an innovative development in debarking technology employing a combination of mechanical abrasion and log-to-log contact.
Learn MoreIn-line filters can have a single or duplex arrangement. A single in-line filter is used in applications where the flow can be interrupted, or the filter can be bypassed when the filter element is serviced. Duo filters are used when continuous filtration is required.
Learn MoreThe M-clean cleaning system is a modular cleaning system that uses high-pressure water in combination with an effective evacuation and air knife system to remove contaminants.
Learn MoreAmong other applications, the press section felt cleaning assembly, also known as UHLE pipe, is designed to enhance uniform CD dewatering and cleaning, and minimize energy consumption on the press section of a paper machine.
Learn MoreDoctor blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreDoctor blade holders position the doctor blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaning blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreKadant desuperheaters are designed to reduce the temperature of superheated steam for optimal heat transfer and efficiency.
Learn MoreA direct steam injection heater provides a cost-effective method to heat water and other fluids by injecting steam directly into the fluid. The direct injection heater is designed to handle a wide range of flow rates and deliver hot fluids at precise temperatures.
Learn MoreKadant Johnson flexible hose has been engineered especially for use as inlet and outlet connections to Kadant Johnson rotary joints. It prevents pipe strains from creating tension or stress on the rotary joint, and does not restrict the joint's built-in flexibility.
Learn MoreTo improve the operating efficiency of pneumatic equipment, Kadant Johnson air separators eliminate 99% of entrained contaminants including moisture, pipe scale, dirt and oil.
Learn MoreKadant sight flow indicators are engineered to provide visual observation of liquid and gas flows. These pipeline indicators are available with ductile iron or bronze bodies. All glass windows are made of Pyrex® or equal.
Learn MoreKadant Johnson steam jet thermocompressors are designed to boost low pressure steam by accurately mixing the low pressure steam with high pressure steam.
Learn MoreComplete systems for all pulping and detrashing applications based on your requirements for quality, energy efficiency, and maximum fiber recovery.
Learn MoreComprehensive cleaning solutions for high efficiency removal of all types of contaminants from pulp slurries.
Learn MoreA full range of innovative options for screening stock pulp. Cost-effective solutions for a variety of applications including wastepaper recycling, deinking, virgin fiber and approach flow processing.
Learn MoreRecovery systems for white water, heat, chemicals, and fiber for a variety of paper and pulp mill applications.
Learn MoreBased on our advanced flotation technology, the MAK-C Deinking Cell offers maximum yield and efficiency.
Learn MoreTop-performing refiners and dispersers built tough and used across the globe.
Learn MoreKadant PAAL’s Konti automatic channel baler delivers high throughput and bale weights with low energy consumption.
Learn MoreKadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials.
Learn MoreKadant PAAL’s S1W fully automatic baler is is designed to press tin and aluminum cans into highly compressed packages.
Learn MoreKadant PAAL’s PAC baler is a semi-automatic, closed end baler with manual horizontal tying, incorporating full bale ejection.
Learn MoreKadant PAAL’s DOKON is the only high performance, fully automatic channel baler in the market to offer consistent and reliable operation with a horizontal twine tying system.
Learn MoreKadant PAAL’s HTR baler is a fully automatic, high-compression two-ram baler offered with a plastic strap tying system.
Learn MoreThe Fuji King Rotary Debarker is an innovative development in debarking technology employing a combination of mechanical abrasion and log-to-log contact.
Learn MoreThe Kadant Carmanah 37/118 SmartDISC Strander cuts tree length or batch fed logs into strands for OSB production.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreThe SKD (Straight Knife Drum) Chipper uses straight-edged knives mounted across the face of a cylindrical drum, fed from an inclined chute, to produce quality chips.
Learn MoreThe Kadant Veneer Chipper process veneer waste at high production rates.
Learn MoreKadant GranTek Inc. transforms papermaking waste products into several viable cellulose granular products used as carriers for pest control in crop protection, green space maintenance, as an all purpose industrial absorbent and as premium cat box fillers.
Learn MoreDoctor blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreDoctor blade holders position the doctor blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaning blades are used to clean rolls and remove stock accumulations, water, pitch, and filler buildup.
Learn MoreRoll cleaning blade holders position the roll cleaning blade firmly against the roll, accommodate roll surface irregularities, compensate for thermal expansion, and facilitate rapid blade changes.
Learn MoreRoll cleaner assemblies are comprised of a roll cleaning blade, blade holder, structural beam, brackets and bearings along with an option to oscillate.
Learn MoreA double doctor system provides the extra performance of two independently adjustable doctor blades within one unit.
Learn MoreThe M-clean cleaning system is a modular cleaning system that uses high-pressure water in combination with an effective evacuation and air knife system to remove contaminants.
Learn MoreAmong other applications, the press section felt cleaning assembly, also known as UHLE pipe, is designed to enhance uniform CD dewatering and cleaning, and minimize energy consumption on the press section of a paper machine.
Learn MoreSpray nozzles are used to remove contaminants and are essential in the cleaning process of many manufacturing processes.
Learn MoreShower systems are used to clean contaminates off machine fabric. Stationary and oscillating shower systems are available for a variety of applications.
Learn MoreThe Mist Eliminator incorporates standard paper machine components to thoroughly clean forming fabrics and eliminate mist that is often associated with high-pressure showering.
Learn MoreElectro-mechanical shower oscillators are precisely synchronized with the machine speed and fabric loop to ensure that 100% of the fabric is cleaned.
Learn MoreIn-line filters can have a single or duplex arrangement. A single in-line filter is used in applications where the flow can be interrupted, or the filter can be bypassed when the filter element is serviced. Duo filters are used when continuous filtration is required.
Learn MoreA proper water resource recovery system is used to effectively and efficiently reclaim white water, heat, chemicals, and fiber from a variety of paper and pulp mill applications, including DAF filtrate, save-all water, and seal pit water.
Learn MoreAn Octopus stock approach system with consistency profiling ability allows the control of CD basis weight profile while paper machines are operating.
Learn MoreKadant provides papermaking tools including forming boards, gravity foils, VID™ Forming Technology, and high vacuum dewatering boxes.
Learn MoreAs demand increases for efficient use of energy and precision in papermaking, the need for reliable and accurate vacuum control on the wet end of the paper machine has never been greater. Kadant provides all the tools necessary for today’s papermaker to optimize their vacuum control system.
Learn MoreA rotary joint, also referred to as a rotary union or rotating union, permits the flow of various media from a stationary supply pipe and into and/or out of rotating equipment. Heat transfer and hydraulic media typically used with rotary joints and rotating unions include steam, water, thermal oil, hydraulic oil, air, and coolant.
Learn MoreKadant Johnson’s product innovation team focuses on making the best solution in the shortest time possible. We provide rapid design and manufacturing services to ensure our new project solutions process for custom rotary unions and swivel joints put our customers at the center of our schedule.
Learn MoreMulti-passage (MP) rotary unions are used when more than one media are used simultaneously. An MP rotary union provides multiple seals between stationary connections and rotating equipment, such as a drum, index table, clutch, or spindle.
Learn MoreHand-crafted rubber expansion joints available in single- and multiple-arch designs are custom-built to fit your application requirements. Options include PTFE-lined, concentric reducing, eccentric reducing, filled arch, lightweight, and off-set configurations.
Learn MoreCustom-engineered single- and dual-bellows designs made from 18-8 stainless steel alloy 321 with high intergranular corrosion resistance. Options include PTFE-lined, universally-tied, pressure-balanced, Gimbal, and hinged, among other configurations.
Learn MoreSolid-molded PTFE expansion joints are corrosion-resistant and made to withstand the high pressure and temperature in a compact, space-saving design. Available in standard sizes 1” to 12” with two, three, or five convolutions.
Learn MoreNon-metallic, flue-duct expansion joints available in eight standard profiles to fit your application requirements up to 2,000 F. Custom-designed with single-layer and composite belts and elastomers with excellent abrasion resistance.
Learn MoreCorrugated metal hose with and without external braiding and metal pump connectors to absorb vibration, misalignment, and piping thermal expansion or contraction. Options include rubber covering, unique alloys, and sizes from 0.25” to 12”.
Learn MoreCustom-engineered and hand-built flexible hose for a variety of industrial applications including high-pressure FDA compliant sanitary hose, chemical hose, air hose, petroleum hose, and material handling hose. Lengths available up to 500 feet and diameters up to 28”.
Learn MoreKadant desuperheaters are designed to reduce the temperature of superheated steam for optimal heat transfer and efficiency.
Learn MoreA direct steam injection heater provides a cost-effective method to heat water and other fluids by injecting steam directly into the fluid. The direct injection heater is designed to handle a wide range of flow rates and deliver hot fluids at precise temperatures.
Learn MoreKadant Johnson steam jet thermocompressors are designed to boost low pressure steam by accurately mixing the low pressure steam with high pressure steam.
Learn MoreWith no maintenance-intensive components to leak, wear, or fail, the Liqui-Mover condensate pump is a naturally more reliable than conventional pumps. As a result, the Liqui-Mover condensate pump will work longer, with less maintenance and far less downtime than conventional pumps.
Learn MoreReplacement level controls are available in both float and float free™ designs. The replacement assemblies are a reliable and cost effective solution for high maintenance pressure-powered pumps.
Learn MoreThe first priority of a corrugator steam system is to provide maximum temperature at the liner and medium interface for glue bonding. The ThermoMax system provides maximum steam pressure to the corrugator rolls and two preheater rolls that immediately precede them.
Learn MoreFor more than 80 years, Kadant Johnson has applied a systematic, application-specific approach to solving steam and fluid handling challenges.
Learn MoreKadant Johnson flexible hose has been engineered especially for use as inlet and outlet connections to Kadant Johnson rotary joints. It prevents pipe strains from creating tension or stress on the rotary joint, and does not restrict the joint's built-in flexibility.
Learn MoreTo improve the operating efficiency of pneumatic equipment, Kadant Johnson air separators eliminate 99% of entrained contaminants including moisture, pipe scale, dirt and oil.
Learn MoreKadant sight flow indicators are engineered to provide visual observation of liquid and gas flows. These pipeline indicators are available with ductile iron or bronze bodies. All glass windows are made of Pyrex® or equal.
Learn MoreKadant Johnson vacuum breakers provide a simple, dependable way to relieve unwanted vacuum which may develop in a closed vessel or pipeline. They can be used to prevent contamination from back siphonage in fluid handling systems, and to protect equipment against collapse or implosion.
Learn MoreComplete systems for all pulping and detrashing applications based on your requirements for quality, energy efficiency, and maximum fiber recovery.
Learn MoreComprehensive cleaning solutions for high efficiency removal of all types of contaminants from pulp slurries.
Learn MoreA full range of innovative options for screening stock pulp. Cost-effective solutions for a variety of applications including wastepaper recycling, deinking, virgin fiber and approach flow processing.
Learn MoreRecovery systems for white water, heat, chemicals, and fiber for a variety of paper and pulp mill applications.
Learn MoreBased on our advanced flotation technology, the MAK-C Deinking Cell offers maximum yield and efficiency.
Learn MoreTop-performing refiners and dispersers built tough and used across the globe.
Learn MoreA complete line of energy-efficient heat transfer products for the chemical pulp mill including blow-heat systems, multiple-effect evaporator & concentrator trains, indirect liquor heaters, condensate segregation, stripping, and methanol recovery.
Learn MoreEconomic recausticizing solutions for the kraft and soda processes, including innovative upgrades to clarification, filtration, and grit management solutions - all designed to maximize efficiency, reduce energy consumption and meet environmental regulations.
Learn MoreThe world’s only all-in-one, multi-stage displacement pulp washer, The Kadant Chemi-Washer® is a proven performer for brown stock and bleach plant applications the world over.
Learn MoreKadant PAAL’s Konti automatic channel baler delivers high throughput and bale weights with low energy consumption.
Learn MoreKadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials.
Learn MoreKadant PAAL’s S1W fully automatic baler is is designed to press tin and aluminum cans into highly compressed packages.
Learn MoreKadant PAAL’s PAC baler is a semi-automatic, closed end baler with manual horizontal tying, incorporating full bale ejection.
Learn MoreKadant PAAL’s DOKON is the only high performance, fully automatic channel baler in the market to offer consistent and reliable operation with a horizontal twine tying system.
Learn MoreKadant PAAL’s HTR baler is a fully automatic, high-compression two-ram baler offered with a plastic strap tying system.
Learn MoreThe Kadant PAAL chain conveyor is characterized by its robust and stable construction.
Learn MoreThe Kadant Carmanah 37/118 SmartDISC Strander cuts tree length or batch fed logs into strands for OSB production.
Learn MoreThe SmartRING Strander cuts tree length or batch fed logs into strands for OSB production. An innovative clamping system secures the logs in place while the carriage mounted Strander extends into the cutting chamber.
Learn MoreThe alignment conveyor improves log feed to Kadant’s stranders used in the production of OSB. The product provides operators with improved wood yield, strand quality and higher production throughput.
Learn MoreIn the manufacturing of OSB and other similar engineered wood products, knives are employed to process logs and produce raw materials (strands) in dimensions that are required by the process.
Learn MoreThe LPPL system allows Oriented Strand Board (OSB) manufacturers to measure and optimize the loading efficiency of their log stranders.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreKadant Carmanah produces some of the wood industry's highest quality and robust chippers for waste-wood and whole-log applications.
Learn MoreThe SKD (Straight Knife Drum) Chipper uses straight-edged knives mounted across the face of a cylindrical drum, fed from an inclined chute, to produce quality chips.
Learn MoreThe Kadant Veneer Chipper process veneer waste at high production rates.
Learn MoreKadant Carmanah has more than 80 years of chip screen application and manufacturing experience. The company’s suspended chip screen design is a result of that experience.
Learn MoreThe Fuji King Rotary Debarker is an innovative development in debarking technology employing a combination of mechanical abrasion and log-to-log contact.
Learn MoreKadant products are used in mixing and extrusion applications found in the production of rubber products. For the plastics industry, Kadant products are used in heating, cooling, winding, and injection molding applications. New technologies in rotary sealing solutions increase process efficiency, reduce energy costs, and help companies be more sustainable in their operations.
A rotary joint, also referred to as a rotary union or rotating union, permits the flow of various media from a stationary supply pipe and into and/or out of rotating equipment. Heat transfer and hydraulic media typically used with rotary joints and rotating unions include steam, water, thermal oil, hydraulic oil, air, and coolant.
Learn MoreYou are leaving the Kadant web site and will be redirected to another site. Kadant makes no endorsement or claims about the accuracy or content of the information contained in these sites. The security and privacy policies on these sites may be different than Kadant.
